Note:
- All samples are free of charge, you only need to pay the shipping cost.
- $50 is an estimate, and you must contact customer service to determine the final shipping cost.
- You need to communicate with us to confirm the product characteristics before purchasing.
Product Description
Viscocity A3311 is primarily designed for bonding rigid or flexible PVC to polycarbonate, without inducing stress cracking under typical molded stress levels. It enables easy assembly of components with close fitting tolerances (i.e. joining polycarbonate to flexible PVC tubing), and is recommended for applications involving small gaps less than 0.25 mm.
Product Details
| Typical Use: | It has also shown excellent adhesion to a wide variety of substrates including glass, many plastics and most metals. Suitable for use in the assembly of disposable medical devices |
| Chemical Composition: | Acrylated urethane |
| Color: | Clear |
| Components: | 1 part |
| Cure System: | UV |
| Cure Time: | UV/ visible light cure: Up to 80s |
| Dielectric Strength: | 31 kV/mm |
| Elongation: | 265% @ break |
| Flash Point: | 77.2 °C |
| Hardness: | 64 D |
| Shear Strength: | 750 |
| Specific Gravity: | 1.1 @ 25 °C |
| Tensile Strength: | 3,300 psi @ break |
| Viscosity: | 200 to 400 |
| Volume Resistivity: | 8.4 x 10^14 ohm-cm |
Reviews
There are no reviews yet.